Electric heating convectors with a thermostat: which one is better to choose?
To create a comfortable microclimate in the apartmentor the house sometimes lacks central heating. As an alternative method, it is possible to use electric convectors, which can be installed not only in living quarters, but also in dachas, pavilions, garages and kiosks.
Why you need a temperature controller
Correcting the convector temperature is possible withusing a special regulator. Central heating radiators and electric convectors have already entered competition for a long time, and in this struggle the clear advantage remains for the latter. They can be installed in any convenient location, without interfering with the movement of the apartment. Modern models can easily fit into any interior. This can not be said of water or electric radiators, which sometimes look cumbersome.
Electric Convector Selection Parameters
Electric heating convectors with a thermostat should be selected according to certain parameters, among them:
- power;
- a type of heating element;
- a kind of temperature regulator;
- installation method;
- design features;
- protective systems;
- additional features.
More about options
Like other electric heaters,described in the article differ, primarily in terms of power. The more impressive this parameter is, the faster the equipment will be able to warm up the room. If you are considering electric heating convectors with a wall-mounted temperature controller, it is recommended to read them first. So, for household conditions, equipment with a power that varies between 0.3 and 3 kW should be used. For the correct choice, you need to calculate the parameter individually. For every 10 m2 will be consumed 1 kW. If the house has gas or water heating, then for heating the same area is enough for 0.5 kW.
On the choice of the instrument by power
Experts advise choosing electricheating convectors with a thermostat so that their power is greater by about 15% than required by the room area. So you can set the intensity of work and save electricity. As an example of low-power equipment, it is worthwhile to consider the convector of the brand BALLU BEC / EZER-1000, for which you will have to pay 2500 rubles. The power of this device is 1 kW. This indicates that the device can be installed in a room with a maximum area of 15 m2. As additional features it is necessary to select a timer, electronic control, and also a thermostat.
Select a model by location method
Electric heating convectors withThe thermoregulator can be floor, wall, underfloor and universal. In the first case we are talking about equipment, which includes brackets. If you want to choose a floor device, you can use the legs on the wheels. The advantages of wall-mounted units are that the wires will not get tangled under your feet, while the housing will not occupy the free space in the room. All that will be necessary is to strengthen the case to the wall and connect the device to the network. These convectors are better to choose for apartments that have not much space.
If you prefer the floor version, then the unitwill be characterized by mobility, but as a shortcoming will make the fact that the equipment will occupy free space. An example of wall-mounted equipment may be the model ATLANTIC F117 DESIGN 500W, pay for which will have 3300 rubles. This wall-mounted unit has a power of 500 watts and is intended for a room whose area is 5 meters2. The modes can be controlled usingelectronic unit. As additional positive features it is necessary to distinguish the presence of a thermostat and an economical regime. The device weighs only 3,594 kg, which allows you to install it even on an easy partition.
The choice of the device by type of heating element
Electric heating convectors with a thermostat can be supplied with different heating elements, namely:
- monolithic;
- tubular;
- needle.
The latter option is simpler andcheap, but its use can be dangerous, because the design is heated and is very fragile. Such products, as practice shows, quite soon fail, so they do not justify their value.
More reliable are tubular heaters,which have an average cost compared with the needle. As the only drawback is the noise at the beginning of work, because when the tube is heated a little crackles. The remaining option is the most durable and effective, but also has the highest cost.
As an example of a device with a tubularthe heater can be considered model of the brand ELECTROLUX ECH / R-1500 E, the cost of which is 4700 rubles. The capacity of the equipment is 1.5 kW, and the device can be used on an area within 15 m2. The design assumes a timer, andThe unit can be controlled by an electronic unit. As the material of the heater, aluminum stands, and the weight of the device is 4.3 kg. This floor equipment has an intelligent control unit, aerodynamic system, blinds and an overheat protection sensor. Such electric heating convectors with a floor thermostat are universal in terms of installation indoors, because they can be placed not only on the floor, but also on the wall. To implement the last condition, the manufacturer delivers a wall mount kit.
Selecting a model by type of temperature controller
The thermostat is necessary for the device,so that the user had the opportunity to control the operation of the heater. With it, you can set the temperature in the room, which will be kept for the duration of the operation. If the room becomes warmer, the regulator will turn off the device, which will save energy.
For today it is possible to meet convectors with one of thetwo kinds of temperature regulators. They can be electronic or mechanical. We choose wall-mounted electric heating convectors with a thermostat, depending on the cost and capabilities. For example, mechanical temperature controllers are cheaper and have a simple design. Change the temperature can be using a step switch. The disadvantage is a short service life and a temperature error, which sometimes reaches 3 ° C. The advantage is that such thermostats do not fail under voltage drops.
Electric heating convectors withthermoregulator, reviews about which are often only positive, can also have electronic temperature correction units. This functionality allows you to set the temperature at a certain level. Such an addition helps save energy when there is no point in spending money on heating. The error in this case is 0.1%, which is an undoubted plus. Disadvantages are expressed in the high cost of such equipment and the failure of the thermostat in the event of voltage drops.
An example of equipment with electronicThe thermoregulator is the BALLU BEP / EXT-1500 Plaza EXT model, the cost of which is 5200 rubles. You can install the unit not only on the floor, but also on the wall. He will be able to heat the room, the area of which reaches 20 m2.
Reviews of some convectors
Electric heating convectors withthermostat wall Nobo, according to users, are able to work, accurately maintaining the set temperature. The models of this series have a high class of protection against overheating and overloads in the electrical network. As the buyers emphasize, all models are designed so that the maximum temperature of the panel does not exceed 90 ° C. This eliminates the possibility of burns.
No less technological are the Frenchelectric heating convectors with a wall thermoregulator. As an example, you can consider the model Thermor Evidence 2 Elec 750, whose power is 750 watts. According to buyers, this is quite enough for an area of 10 m2.
