Homemade sawmill in the household

Currently on sale in a wideassortment presents a variety of materials that are of good quality. Despite this, the consumer wants him to have a self-made sawmill. This interest, undoubtedly, has a basis.

For the manufacture of a sawmill,which can be purchased at a lower price (in comparison with the purchase of the finished product). In addition, it is not always necessary that the sawmill that the producers offer.

Therefore, the ideal option in the householdis a self-made sawmill. The main part of it is the base, which can be wooden, made of thick boards, or a frame welded from elements of metal long products. It can be corners, small channels or beams. The wooden base is easier to make, but for working in the open area, preference should be given to the metal frame, because the wood can quickly rot away with fluctuations in temperature and humidity.

The belt self-made sawmill contains four main nodes:

- saw drive;

- the saw itself with the main mechanism, which requires adjustment of the thickness of the board;

- the device responsible for the movement of the knot making the sawing;

- system for fixing logs.

Of great interest is the homemadesawmill from chainsaw. Chainsaw is a product that is the most versatile device. No other tool can compete with it on the possibilities of use. By installing various attachments, you can get the most amazing devices. The self-made sawmill with the use of chainsaw as the main woodworking unit is no exception.

At the core of the node is a powerful, compact andunpretentious engine, running on gasoline. Here, a carburetor of a membrane type is installed, with an air-tight fuel supply, which allows the chainsaw to operate in a wide variety of positions. From breakages and overloads protects the centrifugal clutch.

The main parts of the sawmill with chainsaws are:

- a base having a wooden or metal frame;

- lifting brackets;

- brackets with a manual winch;

- sawing unit, made with a chainsaw.

If you need to perform longitudinal sawing, then it is best to use a disk sawmill.

Homemade disk sawmill is adisk (steel or duralumin, thickness 3 mm, diameter up to 500 mm). The number of teeth of the disc is 2-3 or more. An important condition for the teeth is good steel. The disk rotates the motor. The capacity for home sawmill is 2 kW. The next node of the sawmill is the guide. All this is mounted on the frame. A feature of the sawmill is compliance with safety measures. The very high speed of rotation of the disc with sharp teeth represents a danger. But with careful and attentive work on the home sawmill, you can saw a lot of good quality logs.