Useful tips
Home cosiness

What is the bracket panel?

The bracket panel is a two-sided orone-sided design, used for advertising. It is attached to the facade of the building or to the support of the lighting perpendicular to the car or pedestrian traffic. Light panels-brackets are double-sided boxes consisting of:

  • metal frame;
  • luminescent, neon or LED backlight;
  • acrylic glass;
  • self-adhesive film.

panel bracket

If the panel is a bracket of a large size, then as a face, a banner fabric with a seal or an application made of vinyl film is used.

manufacturing bracket panel

In the big city it is very spectacular andeffective advertising. The useful area is doubled due to the fact that the light box is used on both sides. A convenient location for pedestrians and travelers makes the signage readable and intuitive.

The bracket panel can be used as aof the index. To find the necessary company the client will help the light-emitting diode arrow, which is placed on the front surface of the pointer. To increase the desired effect, this arrow may flash.

In combination with the decorated showcases, various signs, information signs, the facade can be easily recognized and remembered.

bracket for plasma panel

The manufacture of the panel-brackets is usually made of a metal core. For the fabrication of frames is used:

  • galvanized or painted steel;
  • aluminum.

Milled composite aluminum skeletonIt is sheathed if it is made of steel. Neon or LED elements, volumetric light letters are attached to the composite, depending on the purpose of the sign.

The most important point is the size. The bracket panel is attached to the support only by the end face. Calculation of the cross-section of fastenings should be very correct, so that the structure is resistant to wind, and passersby is guaranteed safety. Of course, if the area of ​​the signboard is large, then the impact of wind on it will be stronger, so the bracket needs a more powerful one. For the strength and reliability of fastening the panel-bracket on the facade of the building, anchors with a diameter of 8-16 mm and a length of 12-30 cm are used.

On the support of urban lighting to strengthenThe panel-bracket is best with the help of electric welding or a special construction in the form of a clamp. It surrounds the post and connects to the panel-bracket with studs.

The panel-bracket for the plasma panel is no less important than the TV. With this fastening you will get maximum comfort and pleasure.

The wall bracket allows you to:

  1. Rotate the monitor or TV up, down, left-right.
  2. Push forward and fold.
  3. Press against the wall to ensure a comfortable viewing.

Everyone can install it independently, because the kit includes:

  • set fastening;
  • step-by-step instruction on assembly;

To achieve the ideal image accuracy, the brackets provide the ability to tilt perpendicularly to the direction of view of the viewer.

To achieve the effect of presence and adjust the direction of sound in home theaters will help you with special twists.

Read more: