The car is a technically complex mechanism,functioning due to the well-coordinated work of the mechanical and electrical parts. In the process of operation, the balance of the two components may be violated, and the car begins to "fail" its owner.

In the life of every motorist sometimes happensso that the car stalled on the go and did not start. What to do in this situation? To whom to apply for help? How to start the process of repairing a car? First of all it is necessary to stop the car as safely as possible and set the emergency stop sign.

Where to begin?

Next, the driver needs to think: why the machine is stalling? The reasons can be a great variety, ranging from low-quality gasoline and ending with any technical malfunction. It is important to take into account, under what conditions of motion the engine stalled on the fly and exactly how it happened. This question is hard to find the answer, if the car has good noise isolation. In this case, it is necessary to remember if there were jerks or vibrations of the car before its engine stopped working. Or he just stopped pulling without any jerks. So, the car stalled on the run, what to do?

stalled the car on the run and will not start

Car stalled for reasons

One of the reasons for the unforeseen terminationthe work of the car and the reluctance to start up is a poor-quality fuel. In this case, the engine starts to work unevenly and subsequently stalls. If this happens, you must immediately call the tow truck.

Perhaps the car was moving across a large puddle,the consequence of which was the blotting out of the electrical part located under the hood. In this case, it makes sense to wait a while, after opening the hood, to speed up the drying process. Naturally, not during the rain.

Is there a problem in the battery?

If the car is stalled on the go and does not start (andthis was not due to water ingress), then after a neat stop you need to put the emergency sign on, again get behind the wheel, insert the key into the ignition lock, turn to the first position. After that, look carefully at the instruments. First of all, the level of fuel in the gas tank: maybe the reason was his absence. If the fuel is okay, then you need to pay attention to whether the battery icon is burning.

why the machine is stalling

A blinking battery icon indicatesto the fact that the battery is dead. If you have a charger, you need to recharge it or "light" it from another car. Experienced drivers for this case always have in the car "wires for a light". Or you should purchase a new battery to prevent such situations from happening again.

If the battery icon does not light,you can try to send a signal. With a loud signal, you should try to start a car; a weak sound will indicate a poor contact of the mass on the battery or body.

Check the engine

Let's say there is fuel, the signal is working,the battery is charged, the starter turns, but the car does not start. Then after performing safety stop operations, turn the ignition key to the first position and see which indicators continue to light or blink. In most cases, the engine icon or the inscription "check engine" is lit or flashing. Let's say that it burns.

the car stalled on the go

In the presence of basic knowledge of the principle of workyou need to open the hood and carefully inspect all visible parts of the engine compartment. Causes that caused a sudden stop of the car, may be damage to the wiring or disconnection of the electrical connection. Having found out a malfunction of this kind and correctly eliminating it, continue to move. If the principle of the car is incomprehensible and there are no skills to work with electricity, you can not do without a tow truck service.

Cars yesterday

There is a big difference in the cars themselves anddrivers. So, a person born in the Soviet period and not knowing firsthand what a domestic car of that time, it will not be difficult to objectively establish the cause of the breakdown. Not everyone can solve the problem, but almost everyone tries. The thing is that the cars developed in those years were technically much simpler than those that are produced today. Let even the same domestic manufacturer.

Cars of the past:

  • did not have on their board of complex electronics;
  • they did not use a lot of sensors, which means that the faults were an order of magnitude lower;
  • the path of troubleshooting the electrical circuit was incredibly short.

The starter turns but the car does not start
The construction of cars of the Soviet period alsowas simple. Of course, it did not provide the proper level of comfort and security - the one we are used to today. But the maintainability of these machines has always been at a high level.

Cars today

Modern auto - complex technical devices, stuffed with various electronics with the latest technology.

Being just a car to move from a point"A" to point "B" - for today it is inexcusably small. In hot weather, many are not enough just to have an air conditioner in the cabin. It is necessary that there was climate control, if not 4-zone, then 2-zone is mandatory. In cold weather, more people are getting used to options such as heating up all the seats of the car, glass, mirrors and steering. Some models have the option of automatically folding mirrors. The number of musical speakers has already exceeded eight.

the car stalled on the go what to do

The car became not only a comfortable home onwheels, but also a small music studio. Enumerate all the functions and systems of modern cars can be almost infinite. Each manufacturer has its own device features and options actions. All this splendor of functions is coordinated by the electronic control unit of the car, has dozens of different electrical connections and contains a lot of sensors, each of which is responsible for one or more functions of the car system.

To summarize, I want to note that the way out ofthe construction of certain sensors or components of the auto scheme precludes the possibility of its subsequent operation. Thus, if the car is stalled on the go and does not start, the best option after checking the availability of fuel will be the evacuation call. Because, without special skills, the car can not be repaired. When the car stalled on the go (the reasons remain unanswered), it does not make sense to look for a malfunction. Without special computer diagnostics can not do. And to find out why the machine is stalling, it is better for competent specialists.

Trust the specialists

Of course, now, as in all times, there are people,which do not need to know the principle of the car. This has its own logic. And if the car is stalled on the go and does not start, it is immediately taken to the service center.

decayed digger on the fly

Know the principle of the car and all its systems- Now the commitment of employees of the service center. In this they help an indispensable assistant - a computer. Today, services for car maintenance and repair are in close proximity. In the cities there are organizations that offer tow truck services, which easily bring the car to the specified car service center.

Automobile communities also work on motorways, helping to eliminate the cause of the malfunction in the "iron horse" or to offer the services of an evacuator for its transportation to the nearest car-care center.

Call the tow truck

Each person chooses for himself that car,which he likes. Modern services give their customers the opportunity to "get acquainted" with the machine they liked: "the history of its creation, a set of options, technical characteristics, safety tests and other.

towing service

Reviews of real owners have a hugeBenefit in choosing the future car. Despite the fact that cars like yours were produced thousands of units - they are all different. The more a person uses his "steel horse", the more he feels it. If the car is stalled on the go and does not start, and you are not familiar with it enough "close", you should call the tow truck.