How to remove the chain from the bike and at the same time do everything right?

The bicycle chain is one of the main workersbicycle mechanisms. It consists of many details. To make the bike ride easily and quietly, you must always maintain it in perfect condition, like all other parts of the bike. Muddled and not lubricated, it leads to rapid wear of the system and cassette asterisks. And replacing it for an imported bicycle is expensive, so you should always monitor its condition.

Maintenance of the chain is in its timelylubrication and cleaning. The question arises, how to remove the chain from the bike, without damaging it? This is easy enough to do. There is a special tool for removing the all-in-one chain - chain refuse. For detachable it is not needed. To remove an integral chain, it is necessary to press out one of the axles from the bushing. The whole process is as follows:

- we find a site to be disassembled. It must be remembered that in the subsequent disassembly, it will be necessary to choose a new site, since with each intervention, there is a loosening, a decrease in the strength of the link;

- We fix the chain in the squeeze with the help of a corrugated screw;

- squeeze the handle of the squeeze device - it is removed, the question of how to remove the chain from the bicycle, is closed.

This part must always be clean. Rolling on the asphalt in dry, clear weather, keeping the chain clean is easy. But cyclists are often in a situation when you need to drive through muddy roads, fords, off-road. Then this important part of the bike is covered with a thick layer of dirt, and there is no time to clean it, as soon as it is necessary to move to the finish. Dirt, which got into the links of the chain, quickly leads to its wear. After a few days, it begins to become rusty.

Having decided, with a question how to remove a chain withbicycle, you need to decide which means it is better to wash it. For this purpose, special cleansing agents are sold. They are expensive, but they perfectly remove the dirt. A cheaper option is kerosene or white spirit. Only use them carefully, as they are means of increased explosive danger.

Wash the chain with dish soap or soapsolution is not recommended, because it is very difficult to dry it out on its own, and it will start to rust quickly when raw. With minor dirt, disassembly is not required, it is enough to wipe the part with a dry rag.

In order not to wonder how to removechain with a bicycle, you can buy a special cleaning device. He cleans it without removing it. In the future, when the detergent runs out, the machine can be filled with kerosene.

The cleaned part must be lubricated. How to lubricate the chain of a bicycle? It is better to use a specially designed for this purpose means. In a desperate situation, you can use automotive oil. It should be remembered that you only need to lubricate the part inside. If you lubricate it from the outside, it will only get more dirt.

So, these simple tips will help keep this important and whimsical part of the bike in good condition and will extend the life of your vehicle.