Stand for laptop with cooling will solve the problem of overheating

Laptops, like regular computers, duringwork basked. If you solve the problem of overheating the desktop PC by installing an additional fan or cooler, then with the laptop this option is unrealistic. Solve the problem of overheating can stand for laptop with cooling.

To reduce the temperature of internal elementscomputer use air systems. Air through the special cracks in the bottom and through the keyboard enters inside, where with the help of built-in fans is run inside the case and comes out through the slots that are located in the ends of the body. Therefore, the laptop is not recommended to be placed on soft surfaces or to close the lid without disconnecting the computer. In this case, the airflow decreases and overheating may occur.

Improving cooling is possible by increasing the amount ofThe air that passes through the laptop, and lowering its temperature. These tasks and solve the laptop stand with cooling. It contains a fan that blows into the bottom of the laptop, increasing airflow and contributing to a better

cooling. Ideally, the holes in the stand must match the holes in the bottom of the computer. Stand with cooling for a laptop can reduce the temperature of internal elements by 5-15^aboutC. With a slight slope, this stand increases the comfort of work: the position of the hands becomes more convenient and the viewing angle of the keyboard increases.

When choosing this device, pay attention tofan speed, bearing type and number of fans. The type of bearing determines the noise level, which creates a notebook stand with cooling during operation. The most silent among the bearings is the hydrodynamic, then comes the centrifugal, the most noise bearing is sliding.

From the number of fans and the speed of their rotationdepends on the cooling capacity of this device. It is clear that the higher the speed of rotation of the blades, the more powerful airflow will be created. At a speed of 2200 rpm, the CPU temperature is reduced by 10^aboutC, and at 1600 - by 5^aboutFROM. It is very convenient if the stand for a laptop with a cooling has a speed switch: for different intensity of use or under different temperature conditions, different cooling modes can be used.

The stand is powered by the USB input of the laptop, and forIn order to compensate for the occupied port, the stand has its own USB connectors. Some models are equipped with hard drive or USB Hub (for example, Zalman ZM-NC2500Plus), speakers (Logitech LapDesk N700). But keep in mind that these "bells and whistles" significantly increase the cost of the device, and if they are not necessary, then it is unreasonable to overpay for excesses.

In the model range there is a stand for a laptopon the lap of the Logitech LapDesk N700, the LogitechCoolingPadN120 modification has an almost flat bottom, so it is convenient enough to use on both the knees and the table. Among a large number of different stands of different designs, colors, made of different materials with different characteristics, you can easily find the option that will be most acceptable for you.