Yellowed plastic: how to whiten with the help of improvised means?
Of plastic created a large numberelectronics, appliances for household use, kitchen accessories, toys and other products. This kind of material has firmly entered our life due to its wide operational capabilities.
What is remarkable about plastic?
The material is resistant toexposure to moisture, acids and alkalis. However, it has a significant disadvantage - under the influence of ultraviolet light, it loses its original appearance, so products that contact the sun, in the course of time, begin to acquire a yellowish tinge.
White plastic attracts its customerscleanliness, fresh look and ability to fit into any interior. It is actively used for both interior and exterior decoration of premises. But over time, unfortunately, all aesthetics are lost. You can fight this problem. It is enough to know how to whiten the yellowed plastic.
Bleaching agents
To give the original appearance to a white product, you can use:
- acetone;
- chlorinated bleach;
- alcohol;
- soda ash;
- washing powder;
- perhydrol.
You are afflicted by the yellowed plastic that has lost its former purity. How to whiten it? It turns out that this is not so difficult, it is only worth remembering a few ways.
Methods of bleaching
By the way, not only from ultraviolet rays canto be yellowed plastic (how to whiten it, we will tell further). The product can only be covered with dust and soot, and in this case there will be no difficulties. Such precipitation does not change the structure of the plastic, so you can wash it with a brush and a solution of soap. If the brush is hard, then you need to carefully remove the yellowness, so as not to leave scratches.
If the house has yellowed plastic, how to bleach it, can be solved with alcohol - isopropanol, ethanol, methanol and other types.
- Attention: When the product is treated with a similar means in the room, it is essential that it be well ventilated. A bleaching procedure should be carried out in gloves and preferably in glasses. In order not to spoil the product, it is necessary to make a test for the reaction of the material on the applied agent on a small area of the surface.
In the stores you can find special napkins to care for plastic surfaces. After using them on the product, there are no scratches left.
In addition, you can usesprays-cleaners - the market today offers many of their options from different manufacturers. Thanks to the use of sprays, you can give the product an original look, make the color fresh and apply a protective layer.
In car dealers you can buy polishes for plastic items, which also help to cope with yellowness.
Aggressive methods of bleaching
If you decide looking at the yellowed plastic how to whiten it - this is not a difficult task:
- For example, you can leave the product details overnight in a bleach bleach or hypochlorite. The yellowness will disappear, and the plastic will look like a new one.
- Another option is to make a solution based on 1 liter of water, 1 tbsp. l. soda ash and detergent. Within a few hours the yellowness should disappear.
- Processing several times plastic with perhydrolyle with an oxidizer, which is used to lighten hair, you can also achieve an amazing effect.
Purify the product with the same perhydrolYou can, if you make a solution in the proportions: pergidrol - 2 tbsp. l., Powder bleach - 2 tbsp. l. and a liter of water. Before the procedure, it is necessary to wash the surface with soap and lower the product into a solution. It is important to regulate the course of the chemical reaction, avoiding a strong overheating of the perhydrol. For a faster process, you can use an ultraviolet lamp.
Acetone also perfectly whitens plastic, but it can not be used for all types of products, since the agent can also serve as a solvent.
The yellowness on the plastic may be the result of structural changes, in which case bleaching will not yield results. It is better to cover the product with an aerosol paint or to make a replacement.
Whitening Refrigerator
For housewives, how to whiten the yellowed plastic onrefrigerator - a constantly emerging issue. After all, in the kitchen there is always a large concentration of vapors, splashes of fat and other cooking results. The refrigerator, especially if it is located near the stove, one way or another, will lose its attractive appearance.
As a rule, in this case it is possible to do withoutthe use of aggressive means. It is necessary to use an acetic essence of 70-80% or a strong solution of soda. Use a cotton swab to rub the areas with yellowness, then wipe off with a wet, followed by a damp cloth. Do not forget to use gloves, especially when working with vinegar.
Whiten the windows
If you have a yellow plastic on the windows, how to whiten it, you'll find out right now.
Windows and windowsills are most exposedexposure to sunlight. How quickly they turn yellow, depends not only on the quality of the material, but also on the care of it. It is necessary to exclude smoking in the apartment, because the plastic absorbs the resin well.
Dust and plaque from fat are also rapidly absorbedplastic products, therefore it is necessary to conduct regular wet cleaning, as it is easier to prevent the appearance of a problem, than to then look for ways to solve it.
Well cleaned windowsill and windows chalk, dentalpowder and laundry soap. If you regularly spend washing plastic, then such tools will cope with fresh yellowness without difficulty. It is necessary to apply them separately, but sometimes you can combine them. After performing the procedure, wipe the product with a damp cloth.
As you can see, nothing is impossible! And if your wonderful white plastic has turned yellow, how to whiten it with minimal expenses, you already know.
