Plastic windows have become very popularamong the inhabitants of Russia. This is due to their durability, reliability, high thermal insulation properties. However, all these advantages can come to naught if the installation of the plastic window is not done correctly.
Installation of structures is best entrustedspecialists who made it. They will carry out all the measurements, fulfill the order in accordance with the requirements and wishes of the customer, and will conduct the installation themselves.
The process begins with the dismantling of the old window. This stage is simple, but accompanied by the formation of a large amount of dust and dirt. Therefore, you should move away the furniture next to it, remove the curtains, remove flowers and other interior items. Also it's worth to be careful not to damage the opening.
Next begins the installation of a plastic window. Before this, it is recommended to check the integrity of the structure, to see if all the fittings are in place, whether it works properly.
Before installing the window, remove the protective film from the frame. Otherwise, after a few years, it can become imprecise, and then it will be very difficult to remove it.
After fixing the frame with anchorsSealing of seams. This is done using a mounting foam. It should be noted that at low temperatures it is necessary to use a special winter variant, which does not lose its properties in the frost. Sealing the structure increases its heat and sound insulation properties. But the mounting foam is unstable to external influences, especially to the sun's rays, eventually loses its properties, collapses. To avoid this, you should immediately perform the finishing both outside and inside the window.
Most often, the seams are treated with a special siliconesealant or tape PSUL (polyurethane self-expanding sealing tape). In the future, the latter is covered with an ebb (outside) and slopes and a window sill (inside).
After the installation of the plastic window is completed,begin to install windowsills, slopes. They are also fixed with a mounting foam. To exclude the displacement of the window sill, one must either lay the load evenly distributed over the entire surface, or install spacers.
The final stage is plasteringcrevices between the windowsill and the wall, sealing of minor defects, cleaning from dirt, dust. Installation of PVC plastic window is finished. Now you can enjoy the new beautiful view of the apartment!