Roller shutters: manufacturing, installation and installation. Roller shutters: prices, installation and reviews
Roller shutters are a kind of blinds, they are called to perform not only a decorative, but also a protective role.
Need to use
Today they are widely used inAs a shutter for windows, as well as garage doors and shutters. All these designs perfectly protect against unauthorized access, penetration of dust, ultraviolet radiation, with their help you can achieve noise insulation and improve comfort in the house. You can install yourself on your own. Many people mount the shutters with the help of specialists. You should be prepared for the fact that their services are not cheap. That's why you can do it yourself.
In order for the system to be able to servelong, installation should be carried out following the manufacturer's recommendations, as well as certain rules. Whatever structure you use, it is necessary to observe a certain technology, it assumes in the first stage measurement and evaluation of the quality of the opening. These manipulations must be performed until the moment when the roller shutters are purchased.
Vertical surfaces you can check withusing a plumb line, but a horizontal plane can be checked by means of a level. After installing the structure, there may be a gap, the maximum permissible size of which is 5 millimeters. If the surface is not flat enough, it must be leveled, you can do it by plastering or by installing the linings in the places where the guide rails will be fastened. In the latter case, the cost of installation works will be increased because of the need to purchase additional devices. Among other things, the design will not look so aesthetic.
Production of roller blinds
Production and installation of shutters is sufficientoften made by home masters themselves. This device can be controlled in one of several ways, the characteristics of which will depend on the width of the channel for inputting the guide elements. If the cord and the electric motor form the basis of the traction mechanism, the diameter of the channels will be 12 millimeters. The next stage is to assemble the frame. In those places where it is supposed to be fixed to the wall, it is necessary to make holes. On the perimeter of the construction they should be located at a distance of 50 centimeters from each other. From the edge of the edges you should retreat 10 centimeters. In view of the fact that the installation of roller blinds on windows can assume different sizes, these dimensions will be only approximate. If we are talking about compact shutters that are installed in bathrooms, then the indentation will be much less. In the next step, the wall around the window opening should be fixed with a pad of the liner, then a box will not be installed above them.
Types of mounting roller blinds
If you decide to use roller shutters,installation of which you will be done independently, it should be decided on what technology will be carried out. It depends on the location of the box. Thus, outdoor installation can be found most often, this does not require the preparation of slopes, which is associated with the formation of a niche under the box. If you use an external type of installation, the roller skid box will be above the opening, but the guide rails are on both sides of it. Built-in installation allows you to place items in a niche or above a window or doorway. If we are talking about a combined installation, it will require a special recess, which should be in the upper part of the opening. With this method, the roller shutters can be placed inside the opening, in the open form they will not interfere with the opening of the windows.
Preparatory work
Technology should be respected wheninstallation is done. The shutters are mounted in several stages, as the first one is the measurement and comparison of the diagonals of the opening. The difference in values should not exceed 5 millimeters. The master must analyze how vertical and horizontal the surfaces are, the deviation from ideal values should not exceed 1.5 millimeters per meter of length. The bases should be free from poorly adhering or crumbling layers of plaster.
Preparation of tools
You can easily be implementedinstallation. The shutters are mounted only after the preparation of the tools, among them a drill, a screwdriver, metal scissors, a puncher, a rivet gun, nippers, a screwdriver, pliers, a hammer, a tape measure, a level, and a marker. If you want to work with roller blinds, the height of which is more than 1.5 meters, then you will need the use of a ladder. To connect the drive, prepare the indicator screwdriver and the multimeter.
Technology of work
Quite often the craftsmen produceself-installing. The shutters must be mounted using the method of fixing the guides. The marker and roulette will allow marking holes. From the edges you will need to retreat about 15 centimeters. It is important to prepare the box correctly. The lid should be attached to the box, after drilling two holes on each side. The diameter of the hole should be 4.2 millimeters. They have to install rivets after the installation. Now you can assemble the box and guides. The master has to make a marking of the fixing holes. To do this, the assembled frame should be attached to the opening. In the case of an overlaid installation, all elements must lie on the wall, which frames the opening. With the integrated installation, the elements should be located on the upper and side slopes.
If you use a roller shutter,installation of which is made to the concrete aperture, then in the holes should be installed dowels. The diameter of the holes for the wires should be from 12 to 20 millimeters. This will depend on the type of construction. A protective spring is installed in the hole obtained. Sometimes the design assumes the presence of locking external elements, for which the holes will need to be marked and drilled, placing them in the bottom of the guides.
Mounting the frame
To carry out these manipulations, you needinitially remove the protective film from the rear wall of the frame. The latter is installed and aligned in its place. The layout of the holes must be aligned, and then check the horizontalness of the box. Fixation of the frame must be made by screws, which will most easily be screwed with a screwdriver. The controls are installed in the next step. If it is an external installation, then these components must be inside the building. It is important to properly install the roller shutter: the rings on the shaft should be exposed at the same distance of 50 centimeters. On the end profile, the bolt on both sides should be installed. The fabric must be wound on top of the shaft in the guide rails. On the upper edge of the blade, pull the springs, and then fix them in the perforated holes of the shaft.
Reviews and Prices
If you are interested in installing roller shutters,the price for these works can be 2500 rubles. If the cost of work is higher, it is better to resort to the help of other companies. Since overstating the value is not appropriate. It should be remembered that in different regions services can cost differently. According to users, it is best to contact qualified masters who will be able to perform the work as high as possible. Otherwise, you may encounter incorrect work, which in the end will cause a breakdown in the structure. It is often enough to install doors together with the above-described works. The shutters at the same time are selected in the tone of the exterior.
