The washing machine does not pick up water: the reason, methods of detecting and rectifying breakdowns

Automatic washing machines have long beenirreplaceable helpers of modern housewives. But, unfortunately, they, like any other technology, have their own useful life. Recently, many of us have to face the problem when the washing machine does not gain enough water. The reasons for such failures will be considered in today's article.

Why is the water too slow?

This is one of the most common problems, withwhich has to face the majority of owners of such equipment. Of course, it happens that the washing machine does not pick up water (the cause of this breakdown will be discussed below), but most often the liquid still enters the drum, only very slowly. This may be due to several factors.

First of all, it is necessary to check with whichthe water is supplied to the tap. It is likely that her pressure is too weak, so the technique can not function normally. In addition, it is recommended to see if the inlet valve of the liquid supply is blocked in the drum.

If the washing machine does not pick up water, the reasoncan be in the clogged filter on the inlet valve. Visually, this element looks like a dense mesh that retains all contamination. Frequent and too intensive use of the filter results in loss of the original bandwidth.

Why does the liquid not enter the drum at all?

If you selected the required program and enabledher, but the washing machine does not pick up water, the reason for such a malfunction may not be one, but several at once. If you do not have the opportunity to call a master, then you can take a chance and try to deal with the breakdown yourself.

First you need to make sure that you do not accidentallyblocked the tap, which regulates the flow of liquid into the drum. It is not difficult to do this, since usually this valve is located at the point of connection of the rubber hose of the machine to the water supply.

In addition, such a malfunction may beinstability of pressure. Immediately reassure those who do not know why the washing machine Bosch does not gain water, (the reasons for such breakdowns are often the most unexpected), that this is one of the most non-dangerous and easily removable problems. To solve this issue, it is enough to make a phone call to the Housing and Utilities Service, in order to hasten its employees to establish a normal water supply.

If neither of the above reasons is appropriateto your case, it is likely that you just did not close the door of the hatch through which the laundry is loaded. When the door is open, the technician simply will not turn on, since a kind of protection against the flood will work.

Why does the washing machine pick up and drain the water?

The cause leading to a similar failure canhide in the incorrect connection of the discharge into the sewer. Often such a malfunction occurs after the unit is moved to another location. In this case, you need to check with the manufacturer's instructions. It is important that the drain hose is fixed above the tank level. As a rule, this distance is about half a meter from the floor. This allows you to prevent the constant flow of liquid into the sewer system.

If after a long and successful operationThe washing machine "Indesit" does not gain water, the cause can hide in serious damage to internal parts. It is desirable that the elimination of such a failure is handled by a qualified specialist, since in order to get to some elements, it will be necessary to disassemble almost the entire unit. Those who have decided to solve this problem independently should realistically assess their own capabilities.

Why does the washing machine gain a lot of water?

Reasons for overflow can hide in malfunctionspressure switch. It is this element that controls the amount of liquid poured into the drum. It is a small sensor, triggered after the tank is filled to a certain level. The most common causes of damage to this part are: leakage of the membrane, burnt or oxidized contacts. Only an experienced specialist will be able to determine precisely whether the pressure switch is working.

Also, overflow can be associated with a violationsealing system that controls the water level. In such cases, the problem arises from the failure of the hose connecting the pressostat to the tank. It can be clogged with dirt or let in air. As a result, the sensor receives inaccurate information regarding the amount of liquid in the drum.

Often, such breakdowns are a consequence offailure of the solenoid valve associated with the natural wear of the parts. In addition, sometimes it is clogged with particles of dirt or rust contained in tap water, which has never been crystal clear.

Diagnostic Methods

If the washing machine "Samsung" does not gain water(we discussed the reasons for this problem above), then you should immediately look at the documents attached to it. Finding out that the equipment is still covered by the warranty, you can not repair it yourself. It is necessary as soon as possible to take it to the appropriate service center, where it will be occupied by specialists.

If the warranty period has expired, you cantry to eliminate the breakdown by yourself. To check how the pressure sensor works, it is recommended to unscrew the water supply hose and blow it. If it is working, you will hear a characteristic click.

To test the automatic lock, it is necessary to disassemble the hatch and make sure that during closing the door the relay end is pressed by the tongue.

Malfunctions that can not be fixed by yourself

If the machine stops collecting water due tobreakage sensor, which controls the level, you need to contact the professionals. The design of this element is based on the principle of expelling air entering the working hose sleeve. The liquid that enters the system starts to press on the air, which, in turn, acts on the rod. As a result, the feed stops and the washing machine does not pick up water. The reason for pressure is difficult to eliminate.

If the fault is caused by a malfunctionprogrammer, then repairs must also be carried out in specialized service centers. This is one of the main parts of the washing machine, thanks to which it can fully function. All complex electronic components included in the design, provide supply and discharge of liquid.

Ways to eliminate the most common breakdowns

It should be noted that repair shouldone who has enough knowledge of electronics and household appliances. If the fault is caused by an unclosed sunroof, you need to disassemble the door and return the metal rod securing the lock tab to its original position. In some cases, there is a need to purchase a new thermal lock.

If the problem lies in the failure of the intakeit is recommended that you unscrew the water supply hose and check the filter. Maybe he hammered, then wash it and put it in its place. If the case is in the burnt coil winding, then it should be changed.

Prevention of breakdowns

Most of the problems,that the machine stops collecting water, occurs as a result of violation of the generally accepted rules of operation. To avoid problems, it is sufficient to follow a few simple recommendations.

In any washing machine there is a special compartment for collecting various small items like buttons, coins and ribbons. Do not forget to periodically inspect the bottom of the hatch.

Also it is necessary to protect the equipment from differencesvoltage. To do this, it is advisable to purchase a safety shutdown device. To prevent the appearance of scale on the internal parts of the washing machine, it is recommended to add special preventive measures when washing.