Advice to the housewives: how to clean the pan from the deposit

Each of us in the kitchen periodically askedthe question: "How to clean the pan from the deposit?" After washing this dish is always quite a complicated matter, especially if something burned on it. Before undertaking a serious cleaning, it is necessary to understand what kind of material the frying pan is made of. For each type of material, there are different ways of cleaning. For example, pans with Teflon coating can not be cleaned with hard tools. But they do not usually form a strong carbon deposit, since the Teflon coating does not allow sticking to burnt food. Much more difficult with products made of steel and cast iron. We offer you some tips, than to clear a frying pan from the deposit.

Cleaning from the deposit by improvised means

1. Aluminum and steel pans can be cleaned with ordinary salt. Pour half a cup of salt on the bottom of a contaminated frying pan and leave for a couple of hours. Then you can wash - burned food should easily go away. If it does not help, try a powder of activated charcoal. Pour it directly on the burnt fat and top with a little water. After 15 minutes, wash the frying pan.

2. The old proven method, effectively helping to clean the frying pan from the deposit, - pour to the bottom of the frying pan the shavings from the laundry soap (half or 1/3 of a piece) and pour with boiling water. Put the frying pan on the stove and let it simmer for 15 minutes. Rinse well in warm water.

3. Cast iron frying pans are very difficult to clean from carbon deposits. Pour vinegar into it, pour 1-2 tablespoons of salt, the bottom should be completely covered. When this solution boils, pour a quarter cup of baking soda and continue to heat on medium heat. When all the liquid evaporates, wash the frying pan in the usual way. Cast iron dishes should be washed every time after hot water using a hard sponge, after which you must wipe it off.

4. How to clean a frying pan from the deposit, which has become entangled in a thick layer? First, wash the frying pan in hot water with a detergent. Rinse well and dry thoroughly. Then treat it with a cleaner for cleaning the oven and wrap it in a plastic bag. Leave for the night in this form. In the morning, wash the frying pan thoroughly with an ordinary detergent.

5. Another radical way of cleaning from carbon deposits. In a 10-liter saucepan, pour water, add silicate glue (80 g) and soda ash (100 g). Place a frying pan in this solution and boil for about 15 minutes. Leave to cool in the solution, then clean the surface of the frying pan with an iron washcloth.

Cleaning from carbon deposits with the use of special cleaning agents

A non-standard solution to how to cleanfrying pan from the deposit. Use a cleaner to clean the sewer pipes. It contains an alkali, which should burn old cinder. Dilute this product with water and very gently, without splashing, rub the frying pan. Then rinse thoroughly with water. Be sure to use rubber gloves and hoods in order not to inhale with vapors from the cleaner.

There are special industrial tools forremoval of carbon from the dishes. They are suitable for almost all types of frying pans, but still, in order not to damage the surface, be sure to follow the instructions explaining how to clean the frying pan from the deposit by this means.